Structure:
Is to accomplish alone, but in the months of the lid, it helps to handle with four hands. The assembly instructions are detailed cautious and concerned only with the essential steps, the required tool is fully supplied, a separate cordless screwdriver with Allen set from the Heimwerkerbox accelerated but. The only tricky part of the structure (the two side parts
are actually not the same in regard to the installation of the gas pressure spring) is not shown graphically or textually mentioned insofar special please make sure having the two side panels pre-drilled holes for mounting the gas spring. The box is entirely of wood, the mechanical parts of metal. The hinges give the impression to be made of brass, but are probably only brass. The gas spring may be designed slightly stronger (cover then bangs but when closing), and will certainly go the way of all the gas springs after a few years. The can then but will surely be replaced and the good thing about wood is that you can fix it, once there is damage. The box is stable and can be used as seating (1 adult or 2 - 3 children) are used when the chairs should be just once.
Operation:
The box is well to moisture from above, the content but not protected from the floor against rain or splashes from the side. The dimensions are ok for four seat / back cushion, more than 4 high back-references are, however, will find little space. On the behavior in the weather over time I may lack sufficiently elapsed selbiger currently provide any information.