I have the Resetter tested before the printer the cartridge as empty display. The level of the cartridge was about 15-20%. At the first attempt the resetting did not work out that the cartridge has not been accepted. Only after the off and turn on the printer and repeated resetting, (behold what a miracle!) The cartridge is still recognized by the Epson SX130 and displayed as brimful. The subsequent print result was also properly. So do not throw the same at the first attempt in the towel and make sure that the cartridge is not empty. Otherwise the trick will not work.
Attention: When resetting Always exercise caution. Since this is a gross intrusion into the printer electronics. Sometimes it works smoothly and sometimes a quarter full cartridge is easy gekilled. (For cheap no-name cartridge that is not doomsday.)