Works without problems in Toyota Auris

The adapter works fine with my new Alpine CDE-W296BT in a Toyota Auris Year. 2007. The only thing to complain about is the fact that one these can not connect directly to the car radio, but that of the radio supplied harness between have to be. This prolongs the Kabelei considerably behind the radio. But here I have to give the all-clear, the space behind the radio in a Toyota Auris is abundant, so that the cable tidying is not a problem. The farther you have to remember yes, there are probably three different connectors on the radios of Alpine and it would therefore be very expensive for every connector on the radio to build an extra adapter.

The whole compound is as follows: Insert the original cable on the radio on the radio itself, at the other end there are two ISO connectors are now connected to the ISO connectors of the adapter. Then the other sockets of the adapter with the plugs that connect from the car stuck in the standard radio of the Auris. Now back stuck only the cable with the small plug for the remote interface in the corresponding socket of the radio, and everything is wired. In principle, everything just steckerei easily.

It worked with me right away, as long as you use the original cable which comes with the radio. I had, at first, an alternative, shorter, used cable from a third party (see my corresponding one star review), and thus there was promptly problems in the control of the four loudspeakers. I can really recommend the adapter and therefore full points.