- The manual is incomprehensible because mistranslated
- The display is too small, with a little practice it will ...
So here's a quick little explanation (by me ^ _ ^)
1 SETTING THE TIME
- Insert a paper clip into the "R" hole to reset to zero (which also clears all programs)
- Press "SET" long enough for MO (Monday, Monday French blinks) select the day with "" "
- Press "SET" to set the hour with "" "then again" SET "for minutes and again to finish SET
Caution 4 in the afternoon = 4 p.m.
2) ENTER A PROGRAM
- Press ">" "to enter the programming mode program number (here 1) flashes
Start times and extinction
- Press "SET" to program 1 (we can make 20) days start flashing, select it with or days or the program should operate
there are a lot of possibilities: a specific day, weekdays only, weekends only, every other day, ...
- Press "SET" to enter the start time (next to the program number you have for example "1 On") and then select the time with ""
- Press "SET" to move to minutes, then "SET still making flash the program number
- Press ">" to the time of extinction 'Off' appears next to the program number
- Press "SET" and then to select the day or days or program must stop
Note: If for example, your program must activate a Monday at 16:00 and stop at 16:30 the same day must be: MO 4:00 p.m. On / Off MO 4:30 p.m.
if your program begins on Monday and ends at 21:00 on Tuesday to 1:00: MO 9:00 p.m. On / Off 1:00 GMT
made "SET" again for the minutes
when everything is correct, press "TIME" to return on time
Note: To check the program 1 press, there are two screens per program, for example one pressing ">" and you have "1 On", program start time 1
a second support and you have "one off" sunset time (you can fix whatever you want by pressing "SET") on March 1 th support and you arrive in 2-one,
a fourth 2 off etc etc attentions hours of the various programs do not overlap, for example in not to be any program that starts
Monday at 17:00 if another program starts on Monday at 14.00 to finish at 16.30 ...
once the programs entered must choose the activation mode, only AUTO ON and AUTO OFF function with programming
has noted that if for example there are 5 program into the machine, the 5 due to be executed one by one, there is no way to run the unit ...
I ADVISED TO SELECT AUTO OFF (see below)
3) ACTIVATION MODE
The MANUAL knob controls the activation mode, by repeatedly changing from one mode to another
ON = manual activation (forced) it ignores program
OFF = manual deactivation (forced) it ignores program
AUTO = ON is on and taking into account the programs
AUTO = OFF decision is disabled and considering programs
I recommend AUTO OFF, a full example to explain
I want to light a lamp from 18:00 to 23:00 every weekend my program will:
1 On / SA SU / 18h00 - 1 Off / SA SU / 11 p.m. if I select the AUTO mode ON my lamp lights immediately remains on
not taking into account the starting time for the first time the program is run and off at 23:00 the following times
everything will work in order, if for example you have entered your program on Thursday at 16:00 your lamp will remain lit the first time
non-stop until Saturday 11:00 p.m.!
With the Auto off mode the lamp is off and turn well to turn off at 21:00 and 23:00 the same day, and will do the same the next day
I ADVISE YOU TO ALL YOUR PROGRAMS ON A SHEET OF ERROR FOR NOT DOING
TIP: Use a magnifying glass or check your settings
4) RANDOM MODE
If you use your programmer for the presence simulation aware that some thieves are starting to get used to the programmed ignition,
they planquent front of your house and note the times of ignitions and extinctions, random mode allows deter, it changes the execution of chacuns
your programs from 2 to 30 minutes at random!
for example you want to light a lamp every day from 21:00 to 23h00: made a normal program select 1 On / every day / 21h00 - 1 Off / all hours / 11:00 p.m.
and activate just the button "RND" (random), RND appears in small print on the time display above the seconds and all your programs démarrerons with 2 to 30 minutes
delay or advance in total chance (It'll never be the same distance) re RND press to turn off and all programs have the same start and end ....
Here I hope it will be helpful to those who have problems operating the unit