Very good reception performance, poor manual ...

The kit includes the large antenna plate 25x25cm, 2 decent feet, the big cigarette amplifier module and the plug power supply. Mounting screws are not attached.

An instruction manual, if one can call it, is just as multilingual A4 sheet, consists only of a German sentence and a few sketches. Tips to receive will not be given, not even to the fact that you can use power efficient the antenna without amplifier.
The guarantee document also consists of a copied A4 sheet with a brief reference to the 1-year warranty. A manufacturer's address is not known, only a mail or Web address.

For Use:

Even the product name speaks of "FullHD" antenna on the package jumps a counter and a 1920x1080 Logo 3D will also endeavor.
This all sounds great, but is only inflated advertising.
In Germany there is no Full HD via DTT (then called DVB-T2), but only SD = Standard Definition TV = 720 x 576 pixels. This will not change in the near future. So you can not even HD 3D received (only via satellite = DVB-S2).
It is also an antenna not matter which digital resolution it receives. With each! DVB-T antenna you can receive all forms of resolution.
Only the interference-free reception of digital data brings an image. And so, what a surprise, you can also receive our "simple DVB-T" ...

... And this works well with this antenna.

Just quickly Connect only times the antenna plate, showed quite good results. I live in a DVB-T outskirts and received all the programs with the level (lt. TV) 4 to 5 from 10. The image is to be expected as with DVB-T, interference-free (otherwise it would, apart from a short "block phase "to see a picture).

The interposition of the amplifier module brought a significant improvement in performance, with the same picture quality.
Power is here - reserves. Heavy rain, thunderstorms or snow also affect the digital signal is very strong, like the old unsuppressed lawnmower from neighbors and at a high power reserve you remember any of this.
Something you have to be careful with setting the amplifier output. The reported by the TV signal quality is poor at too high a setting.

Interference from DECT phones and mobile phones I could not tell.

A bit annoying I find the cable. The cable of the antenna is thin, so actually less shielded, then why has the antenna cable from the amplifier with approximately 6mm normal thickness is difficult to understand, especially since even this comes the power cord.
The cable of the antenna plate is unnecessarily out above. That the grooves in the housing of the disk serve as a cable guide rear stands nowhere.

For power consumption:
There are no specifications given, not what the amplifier consumes so.
A switch is available, but if you use him? Who makes the TV as I in continuous standby, and the antenna will not turn off.

Of course, the antenna without amplifier consumes no electricity - so try and see if it is enough.

The amplifier is equipped with a switching power supply that detects when no power is demanded but then turns off: very good !!
Consumption then 0.05W.

The standby power consumption (ie, switch on the amplifier / LEDs) is between 0.6 watts and 0.8 watts (level 1 to 4). Annual consumption then 5,3kWh to 7,0kWh - can live with.

Conclusion:
The performance of the antenna is well and therefore it is very versatile.
Needs improvement are the operating instructions and, at least for some, confusing advertising (keyword FullHD).

++ Very simple operation
++ Running quickly
++ Very good switching power supply
++ Without amplifier used (then only a thin flexible cable)
+ Processed fairly well
+ Fairly low power consumption
o without Rating: plastic antenna plate may be a little high
- Three cables that bother me a bit
- Poor instructions, no practical tips
- FullHD, 3D, etc. Advertising only without benefit