My ASUS 17.3 notebook, the display can only open up to 120 °, is hence it was not possible to film from above to bring down as described, but I have the whole horizontally from left to right carried out while the large spatula always 2- preferred 3 cm and then applied the film by up down movements of the spatula. However, at the end of the film was about 1-2mm but wrong thing by foisting the film is hardly visible.
With the spatula or credit card, I was able to reduce the bubbles of 30 to 10 pieces, but these are the use of the laptop barely visible - only when switched off they are very, very, very ugly, and two of the 4 corners are also not fixed.
The film is about a week on it but the ugly bubbles are visible as the first day.
The blisters are caused by dust grains, the included microfiber cloth is far too small and unsuitable zubekommen around the display Staubfei. With a greater cloth of dust can be removed better, but not 100% without dust - a person, it is also not possible to hold the film to use the spatula and wegzuputzen the dust. Please assemble the film must be secondary.
If you clean the screen circular, is simultaneously loaded statically with the microfiber cloth and thus you never get the display free of dust.
Conclusion:
The film anti-reflective display that truly stands out!
But you do not get the dust free way - I WOULD DO NOT REMOVE THE FILM AGAIN BUY and can not recommend this too.
The film costs 19.95 euro probably is the film in China for 0.30 - 0.40 euro bought.
Many Greetings ...