1a - quality, price and space requirements

The search for a suitable seat was not quite so simple. Often the parts took up too much space, Then there were prices that were quite high for this purpose. This seat was found a product in which everything was in reasonable range.
This is the cover made of synthetic leather, is sufficient. Those who want to necessarily have leather, which must invest just a few euros more. But this is known everywhere.

- Packaging -
The packaging size is less than 2 x 2 side by side stacked crates. The seat is well and securely packaged.

- Construction -
The construction is to accomplish good in itself straightforward and follow the instructions. The screws must not be fooled by the drawings on two different sides to themselves. There, the same screws are illustrated on both occasions and we think at first, it would therefore be missing screws. This is not like that. In the end even some of the smaller screws were too much in the package. Whether these are intended for the fitting of a steering wheel and the Peadlerie, I can not say because my steering wheel required other screws.
The seat is supplied folded. Is he then unfolded, the folding of the seat for space-saving stowage is possible, but this is actually too costly. The Velcro lining the back has to be loosened and the locking mechanism must be disengaged. For frequent or even daily operation that does not make sense.

- Steering wheel mounting -
For the mounting of the steering wheel and the pedals holes are pre-drilled. There certainly find the owners of other steering wheels viable options. The holes are appropriately available on the Logitech G27, even if I was looking at the pedal plate only once. Somehow, I was there a little "blind". For the pedals the double holes are provided for the G27, which are as it were without bar beside each other (like an 8).
With the attached cable ties can be the cable attach Although useful, but a few extra cable ties would not be bad. Who has something not at home, the place in the building market sufficiently favorable selection. This is not a shortcoming.
On carpet, the seat can be set up for use on hard surfaces are approximate Polte strips to glue on the bottom in.
Who likes, can the seat and on the ground screw. Corresponding holes are intended in the context.

- Bedienbarkeikt -
- Einselltung the seat:
The setting is indeed with the thumb screw is not complicated, but of course, brings the optional numeric slider significant gain in comfort. This applies to the "boarding" and then straighten up to different sized users. Who uses the seat alone and so can climb behind the wheel that comes as well as loose handle.
- Steering wheel and access:
With regard to the accessibility of Lenkrade and the operation of the same, there are no defects. When G27 has additionally the shift lever, for the mounting bracket should be ordered. The easy to attach and vebreitert the Aufstellungsmaß nur'geringfügig by the dimension of the gear lever console.
The brake pedal of so the middle pedal is not to reach quite as flawlessly through the "steering" if you drive only with accelerator and brake, so the gas right, left actuates the brake. In the case, you should configure the clutch pedal as a brake in the game.

- Résumé -
A very good quality, not too large in space and fairly easy to set up. Although since not enough 10 minutes, but the mounting of the steering wheel should one hour sufficient. Who then laid the Kalbel the steering wheel yet perfected, the just takes a few minutes longer. ;-)

The seat is highly recommended, and the slider marked Komfortzuwach brings and the inclusion for the gearshift console when G27 is mandatory. For both (Silder and Gear Shift Holder), there was a package for the price of the seat!
After that you should look for. I've found this by accident. When selecting the Gear Shift Holdsers
All 3 areas of less than 300 is a reasonable price.