First of all the unit was no description. Dar box contained only the AC adapter and a standard power cord for connection to the 220V outlet. Since the existing on my motherboard (necessary) slot (12V) is a 4-pole connector space, newer boards have here evidently an 8-pin connector, I was surprised, as it was indicated in the pictorial representation of the power supply plug with 1xP4 but that PSU had a 8xP4. Furthermore, a floppy connector power supply is displayed on the pictorial representation. This was the power supply but not available. So call to CSL Computer where I quickly got through without long hold. Only the call transfer did not work immediately. After two more calls I had the competent seller on the line. The told me that the 1XP8 plug is halved and then one of the two connectors should fit on the 12v my Main the board. Exactly that matched. The other half is now hanging in the ATX housing. The floppy connector should be present, but is not. I then a Y-adapter cable attached to a 4-Pin Molex with a floppy connector. CSL should at least point out the divisibility of 8xP4 plug here. One wants to damage anything in the warranty. In addition, the images should be adjusted to the parts list! The power supply is also very quiet with the 140mm fan. In load range with 4Festplatten, graphics card, IEESteckplatz, 4 constantly occupied USB ports and mouse, Tatstatur, LAN and an additional PCI interface card, the quality will still show!