The case is correct, it protects the smartphone relatively well for small table height falls but when closed. I did not want to test when open but I have doubts as to its effectiveness in this situation that fits him down when using Motorola's G ...
The stylus is well recognized but is useless because there is no accommodation for the store, which is a pity for my big fingers.
The protective films provided appeared correct at first but there are so many problems in the long term I will quote.
First, the films have short instructions for installation except that the average user is not going to read them.
Basically, the protective film is between two conventional plastic films. One gets one, the one whose label says in English "Please peel off this mask BEFORE application". Here we see that it fits behind therefore arises on the screen. To avoid bubbles, I curved the length movie to put on the center of the screen. Then slowly spread and pushed any bubbles to be only around the edges and therefore possible to release. Once we removed the visible bubbles, then comes the hard part. Remove second conventional plastic film. Already, it is the same size as the protective film, making it difficult to untie the corner without having the film and not to raise the protective film and thereby lose our installation efforts of the film. When we finally arrived to relieve the remove slowly by keeping a finger or two on the protective film for not he left with or that raises too generating bubbles. After all this, there is a protective film of the right size for the screen and that's good.
EXCEPT second, the film is too adjusted to the size of Motorola G. In millimeter. Which means that if your installation exceeds, you have a tip that is lifted. To overcome this, we must draw on the screen protective film cover in the opposite direction of the lifting area. Do not do it if not for too long will create a new one in the exact opposite. After several mini trips you finally have your protected screen an adjusted film. Good.
BUT third, the film has a loose glue enabling manipulation mentioned above and provides a daily problem: it moves. Indeed, with the case according to the way you enter the in your pockets or other place of storage, the valve will press the case the film and therefore potentially move. So that you will have to replace it a few times a day if you do not want to have to lift the transition zone are less well recognized by the phone. Note that in summer the film moves more!
In the end, bought cheap (7) it was worth our money, a good package of cheap protection.
If you want real protection, aim for a bigger budget for the cover and a true mark for the protective film.
Otherwise, it was okay overall, but not without flaws ...