Finally, we are stuck on ABUS PR2700. There is a previous model and the PR2600. This is basically almost identical to the PR2700. The decisive difference for us was that the PR2700 has an integrated cylinder protection of the cylinder from the outside and is also a hopefully safe lock cylinder fitted with VDS class-B.
I was uncertain whether I should install the bolt itself or to do so through an expert. Technically I'm not clumsy, but I've never done something like that and thought that if you have to make a hole in the door and then maybe slipping, you get the salad! :-)
With several security companies, we have caught up with us offers. All who sell us the latch as manufacturer price want (389.00). Of course, I do understand that smaller companies hardly gain it. But here at Amazon, I have to Manufacturer Price 150.00 already !!! saved. Also us the cheapest company has made an offer for the installation with Knapp 100.00. Thus I would be together almost exactly twice the going become. Amazon = 250.00 = 500.00 security company.
Therefore, the decision was clear. Installation I make myself and order on Amazon. With a saving of 50% Torch course I do not long.
To install:
It was not hard. The guidance is in the details. It requires a hole saw with a diameter of 51mm and a few drills for masonry (including a 10'er masonry bit to at least 18cm according to the description).
The latch I stopped inside the door lay the height festzu. Then measured the exact center and then once drilled with a wood drill. Thereafter placed the hole saw and drilled from the inside half and the other half from the outside.
Then put bolts on the door, align with spirit level and then tighten screws with four. Thus the bar is ever fixed. Then only the Schliesskästen mounted left and right of the door. These make a high-quality and stable impression. One should this anchor with the enclosed dowels in the brickwork. These are 12cmm long anchors inclined to be set into the wall.
Right, I have to be ordered for reasons of space nor a ABUS wall anchor (PWA2700). Went smoothly. For this purpose, a 16mm drill is still required to the two holes for the bolts to drilling.
Finally, cap measure, cut with jigsaw and place.
That's it! 100,00 saved! :)
Who is not technically inept can perform the installation yourself. Otherwise, there are on youtube Top Video for installation: [...]
EDIT: Well, Amazon has apparently enter my link away ... So at Youtube just PR2700. Then, among other things appear a video of a locksmith O..dorf. The video is 39:24 minutes. and explains how to install a white PR2700 ...!
Conclusion:
Makes a safe and high-quality impression.