Absolutely great price - performance ratio

I close now with this Overlock since about 3 years virtually all children's clothing. At first I was skeptical whether I needed this because I have a good Bernina sewing machine. Through my amount of clothing my Bernina was very stressed and I sewed a lot of T-shirts and sweaters, but where I was very slow at the seams.
So I bought the cheapest of Bernina as a test.

Meanwhile, my test is so good that he does most of the sewing! Nothing broken. Threads tear not - as with the Bernina sewing machine expensive but often .... (B710).

So my employment is 80% to 20% for Overlock Sewing Machine.

Relatively thick stuff it also creates so Ribbed cuffs double + 1 Jersey.
1 and 2 fleece jerseys is just yet, but it must then be no seams inside.

The seams are tight and very nice, I have a friend who has one of another manufacturer, as for example solve the serger sewn signs / Ribbons again.

It is also relatively forgiving when something too thick inside had .. also because I still do not get damage.

According to it is. But that's nothing, it is fully mechanical, therefore maybe the high reliability? at the B710 I every now and then bitches, I just get away, when I switch to actually and.

The seams are then also completely extensible

Who has little money and wants to sew a lot, buy this and then a cheaper machine to so you just go well over the rounds.

The seams are then also completely extensible. Much more ductile than the stretch stitches the B710, for example because it is superior to an expensive machine far.

Could I once again decide, then I'd better buy an expensive Overlock, which can also easily cover stitches.
(I think that can ev. If you remodels, but that makes me too much trouble, because I need them so every day).

That one thread the threads manually here must I find not so disturbing as that is sometimes described. I close with only black and white with. Ev. even light blue.
I then collect always dark or bright sections cuts. Then I have to change very rarely the thread.

The thread I find not sooo difficult. It is important that you only the knife down and then threading the sewing needles. Even if the thread is out the bottom of the knife, it adheres better to this order and threaded again everything new one, the other way around went the wrong with me. (Why went with me to the thread at all out? My kids pull in out ...).

If you anknotet new threads, you can also run through.

The setting of the thread tension, I also did not find difficult. I have here, depending on the cutting width and material in the sub-needles higher than 4 set. But this is ev. Individually with the machine.
I think the mechanical adjustment but better than the 710, because I can adjust much more accurate. I have the control. In the B710 then I've no direct control more what makes the machine when I as in software what umstelle, also because I can regulate only one thread tension and not both.

So direct is dearer to me and I find it easier, once you've figured out where to turn. but that is recorded there so great that you can see exactly what thread in the seam where cometh.

So absolute k on recommendation.