In addition to the artisan knowledge, how do you get to keep the four 10er dowels professionally in the wall, of course, a little tool must be present: -or drill hammer, Phillips screwdriver and 13 mm socket wrench / ratchet. Although the enclosed screws and dowels are of quite acceptable quality, the base was finally here assembled using reinforced FISCHER special anchors same caliber as the masonry requires. Otherwise the corresponding attachment materials that came with were used. The positioning of the hanger in the TV is flexible and can be carried out as required. With which the screen is simply hung into the base plate and can afterwards be corrected in inclination and page orientation. All in all a most foolproof system which is equipped for almost all applications.
_Kurz & Bündig_
The anxious question always is yes: Can a part for nearly 15 Euros at all any good? The feel (black powder coating without error, assembled properly, no burrs, etc.) is already in order. Of course, one should not expect luxury here. Nevertheless, the design shows a thoughtful, extremely flexible and robust - Whether the good piece but actually digested 95 kg continuous load, I can not judge and I will most likely also find out not by experiment, as our LED TV (40 inches / VESA 200 x 200) brings only around 17 kilos, so the bracket so far completed more than playing. The bottom line is a fully functional wall mount with perfect price / performance ratio.