To install the camera in my network I have invested many hours. But where was the problem? The camera hanging into the net via a LAN cable worked immediately and without any problems. But without cables it was not to be found in the WLAN. On Router she answered also not. Ok, any settings will probably be wrong. So that the first camera menu called and compare with that of the new. Point by point was checked whether there is something wrong. The trouble of it - all settings (until of course the IP) were identical! So why not go this Schei .. thing online? Long story short .. the problem was that my router's channel itself can choose and so he always asks me the best channel available. He often uses the rear channels. However, these are not supported by the camera (more)! If I switch the router on port 11 and including everything goes without problems. When channel 12 and 13, this camera easily denied their service. Sorry, if only it would only get the camera one point. Someone without basic idea in network architecture would never come to this error, especially since running a seemingly identical product already without any problems on the network.
But circumcision of radio channels is not the only change to its predecessor. The new model has a built-in LED housing that also not be switched off. Before using the camera for example to baby monitoring, has the evening a beautiful play of light in the room, because the LED is so bright that the whole plastic casing illuminates beautifully wird.Wer it trusts the camera on the ground screw (4 screws) and the LED just about sticking with thick tape. After that the housing remains dark and its use as Babycam nothing stands in the way. When model from 2011, there were not these LED. Why has now installed (it sits on the WLAN module) reveals itself probably only the responsible Chinese.
In summary, one can say that the camera is actually quite good, once it has been incorporated and the LED was darkened. For laymen, the router, the camera is accidentally transmits on channel 12 or 13, unfortunately unusable because they will not go into the net via WLAN. Only due to the high quality of the model from 2011 creates this camera just so on point 3 of 5.