Good Morning have also bought the fan and draufgepackt here:
You read everywhere that it is not a reference design that uses Asus (also true, I will get to later), I've still plan to arrive lassen.Ich would be quite to tinker been ready since the original jet fighter from Asus is in idle it silently, but once you gambles, it was nervig.Also, clear, mechanically fit properly without tinkering etc. pp.Eigentlich I got it just built on it, as my buddy and Vorrezensent Mario has his MSI.Auch the Asus innately no RAM cooler (but also getting cooler in the voltage transformers, which are not in the way), but she has now get when they're at it, right?! Just be aware only at the upper RAM number which the Kühlerchen not to stossen..dazu frame by relying on only the frame (without fan fuss, of course) and release the GPU (the holes are from the position 3 of the manual, to find image in the customer images) previously already it glue the black spacer (3.5 mm) , shortly afterwards assemble, RAM cooler stick (nice for guidance, nech ??! ;)) Can lassen..Rahmen dry 1H hour course before back down and back to the radiator to be screwed, here again (as with MSI) take the middle hole as originally angeschraubt.Nun in delivery, we come to a smaller Although problem ... Asus uses nen another pinning for Lüfterschlussda so we have a difference to Referenzdesign.Ich've cheerfully Pins exchanged, but that was not all that ... ergo the supplied multi (7V / 12V) MolexAdapter benutzt.Zum test I've taken the first 7V connection. Temp in idle: 29 degrees, fan not annoying to not audible to me, when the box is again under the table not anyway Heaven Benchmark 3.0: max.60 degrees (because the card is also extremely stressed artificially) and NEN practical example, Devil May Cry, the Game is had to the reason why the fans got on my nerves and NEN New ago: Devil May Cry: previously 72 degrees Asus fan, despite Afterburner (Grakatool with the possibility for Tempkurven for fan control) jet fighter Now -> 45 degrees SWOR: 45 degrees, before 60 Diablo 3: 45 degrees before 60 All in 1680x1050 resolution. The 12 V variant via Molexadapter makes the fan significantly (but still acceptable) louder, but the temperature obtained by only 2-3 degrees down, I think I'll use at home, the 12V and the fan speed on the rules of my housing do .... then goes halt no longer via Afterburner, but No worries ... Temps are still angezeigt.Evtl. has indeed anyone have Fan Control (DriveBay or similar) and then you can also use to control. Conclusion: again NEN successful piece of hardware from the boys (had already NEN Arctic on my GTX 275), strong buy recommendation, because it fits well on the non-reference Asus, it is even more compatible than angegeben..5 star