TO AVOID. Everything sounds great ... until installation. Indeed, the power wire that you will connect can neither enter nor leave the box! Domino is enclosed in a "cage" plastic which no thread can not leave or enter, except the little son who are going to the dryer, but in any case the power wire. Besides, the dryer is supplied in the illustrations. Only possibiltés to get by: either make the holes yourself. Either a hole at the bottom of the case if you have a flush feed or a side hole in the "cage" that allows the power cord to circulate in the rest of the casing and out through one of the openings provided for this purpose (it year there was 3, but without grommet, which is not terrible for a product intended for a bathroom). Unfortunately, once wall mounted, the unit does not hold good because there are two screws at the top. A third is missing and must again make a hole in the box ... and then, when you want replace the case and his beautiful plastic coating, it does not like to use (2 small catches that stand the slightest movement).