Unfortunately, the connections are but barely usable:
1. The cables are very rigid and inflexible. Bends you with power, she slowly but surely bend back and pry the glued LED strip off again.
Although the 2 clamps hold stable per se, but not provide contact.
3. have the terminals are so thick that the bonded LED strip is thereby increased quite a bit.
The error in my searching I've checked several times the contacts on the LED strip, cleaned and measured. Where it was not easy.
Ultimately, I'm gone over the terminals to remove and solder the cable. Just the work that I do not just not wanted to do, but now there are at least no longer outages or flickering.
