Blitzeiswarnung

Blitzeiswarnung

Klarstein Ice Volcano ice maker Gastro ice dispenser for 2 different sizes of ice cubes (3 liters ice machine, CFC-free with compressor, LED light effect) black

Customer Review

Klarstein products I have seen so far as a combination of modern technology and design with affordability.
It comes more plastic for use and there is no thousand additional functions,
but the main functions controlled it straightforward and reliable, at a very attractive price.

So even with this ice maker.
He has the size, shape and weight of a fully grown coffee machines.
On the side of the flap is for the water tank (3 liters), to facilitate filling a hopper is.
As with coffee machine hygiene plays a major role.
So it must be cleaned before first use, are "drained" after the ice production.
Unfortunately, that's a bit through the narrow lateral opening cumbersome.

The actual Eisbereitungsfach is above. The top flap you can follow the process closely,
as a the preparation tank is pumped water, then a sort of shuts down 9-man Tauchsiedergefrierpendant
and grow in almost 7 minutes around the submerged heads ice.
The result is 9 "ice" in the form of thickened thimbles.
Depending on the exterior and water temperature or whether size S or L was chosen swayed the time to create with me 5-9 minutes.
The process is accompanied by a very recently humming when the water is pumped, followed by a typical refrigerator noise,
but most of the time you can hear the fan that generates the sounds of a high-performance PCs.
This Lüftergräusch is pleasantly uniform and may be disturbing in an otherwise silent room only in the immediate vicinity.

The finished ice is transported right next to it in the container. The ice maker produces so long as water is available and the collection container is not full.
For both, there is a warning light on the control console.
If you press a glass against the lever at the output illuminates a blue light and a coil transported pieces of ice to open up.
Depending on how the ice is, it takes a while to pieces of ice fall.
Equally they therefore do not fall exactly evenly also in number to or is possible that after releasing the lever still nachrutscht a piece, because that are located on each other.
With a bit of care but that is no problem.

To make the challenge a bit bigger, I've used the machine for several hours in a 27 degree warm room.
It has changed neither the production time significantly, even the ice cubes have bonded and the machine was not hot.

By the by. Not the noblest machine, but quickly, functional, reliable and totally cool.