but the construction ...

First of all, I've built dozens of pieces of furniture in my life, with good instructions with bad instructions - and I would describe as quite experienced. This part but really tops it all!

A construction alone is not possible, you have to be for two in any case. However, this is nowhere (no pictorial reference in the form of two people on the manual).
The body is screwed together quite quickly. One must however be careful, because although the parts look the same (eg side panel from above and from below) - they are not! It so happens that, after screwing front right and back left a gap has (which can also be elsewhere) and you have to take everything apart again, and then two parts (or more - or less) to rotate 180 degrees and to put everything back together.

Now one should screw on the lid, I have decided to mount first the feet, for a time at the entire chest with lid alone, without taking part damage is not possible.

The cover is now the highlight of the construction. To attach the hinges to the body - paid. Measure bit, tighten, done. But now: you have to keep the lid next to the chest, adjust the same time that he is just, bears and even front and rear is flush - a thing, even for two, the impossibility. We have a stool pushed under it, so that the lid only once has a bit stop and then two people who held him while the third hinge anschraubte. The first attempt failed after the lid was on the screw (only one screw, of course), so that you had to adjust again. Here clearly lacks a marker, where because the hinge is how to fix.

If you have the lid on it finally, even the side brackets must be mounted. Caution: there is nowhere even a hint at what distance and where exactly you want out. The folded part must naturally fit entirely into the body, otherwise it would remain so hang when closing the lid on the edge. Only ... where it should go, no strut is located on the side panel! So you have to attach it further up the margin. The screwing on the lid is then the final act, it is recommended to measure the side of where the part is mounted, so that the lid can subsequently also close smoothly.

Did they even brought the ordeal of building behind it, you can finally enjoy the chest: it offers plenty of storage space and you sit very well on it. The upholstery is fixed and you do not sink in.
What definitely missing is an indication to how much kg part is resilient. From the square can comfortably four people sit on it, but when my son (140 kg) alone on it sat, it cracked already and when you get up the chest swayed slightly.

Conclusion: a beautiful piece of furniture with serious defects regarding the assembly instructions and missing clues.