The production of buttons is easy and includes only 3 simple steps, which are explained very clearly in an enclosed instruction manual with help of some images:
* The top of the button blank is inserted together with the design and the protective film in the tray 1. During the pressing process is required at the end of a little power, but also sensitivity, therefore one should be smaller children when creating buttons aside.
* In the second step inserts the bottom of the button blank in tray 2 and leads the pressing process in the same manner by as in step 1.
* Only the badge with safety pin has to be pushed into the last hole on the back and finished the first own button!
The Button Maker makes a very good impression in workmanship and quality, although it is made of plastic.
The Button Maker will be a template to cut out their own motives, as well as all the material for 15 buttons and various templates.
Refills are available for the Button Maker containing material and templates for an additional 30 buttons. Whether refills from other manufacturers may be used except Bandai, I do not know unfortunately. Definitely worth it just when buying the refills a price comparison, since the price fluctuations are here very large and per pack quite can be several euros.
The creativity is thanks to the included template are virtually no limits: whether photos, thinner material, motifs from magazines, little drawings or stickers advertising -> Badge It!
The finished buttons have a Ø3cm.