Fast loading like a conveyor belt

When modeling and RC car fan, I have a lot of batteries. To load this 7.2V batteries I use professional chargers. Only for small 1.5V NiMH and NiCd batteries for my transmitter, still lacked a good charger. So far I use two 4-way chargers from the discounters, whose major disadvantage is the low charging current, so that it takes up to 10 hours, are loaded to 4 my batteries.

Therefore, I ordered this Foxnovo charger, which according to the manufacturer's specifications can charge up to 8 batteries simultaneously and intelligent. That was my important because most of my station need 8 batteries.

The delivery is to be found next to the battery charger and AC adapter with power cord. There is guidance not, only a few brief instructions on the packaging.

With this charger it is possible to charge NiMH, NiCd and Li-ion batteries simultaneously. That can be placed in the charger, separately or jointly and independently of the type of cell batteries required. In addition, it still has a USB port for charging USB devices. Pro battery 3 LEDs indicate the charge status in 33% increments.

Charging is easy: insert and watch as they are loaded batteries. With a maximum charge current of 650 mA, therefore it takes a maximum of 4 hours (approx) to charge a 2400 mAh battery. That's about twice as fast as with my previous chargers. Since I in all possible devices use my 100 battery (transmitter for RC cars, RC receiver for nitro vehicles, etc.) I have a relatively high need to charge batteries quickly. Nothing is more annoying than an empty station when outside the weather is nice and you want in the gravel pit. With this charger, the batteries are charged quickly in the morning.

Of course, the charger can also be used for other purposes. The 4 Remotes our Nintendo Wii each have 2 batteries, so that we all can charge simultaneously. Similarly for small RC cars as they like to use children, one usually needs 8 batteries. Therefore, this battery charger gets from me a clear recommendation.