Good support for the Galaxy S3

The idea, specifically to develop a holder for cars is awesome. The holder remains in the installed location and can be removed completely (no holes or the like in a car).
The holder consists of two parts: (to be ordered separately) the ProClip, which form the basis of the holder and the holder for the cell phone, then on the ProClip
is attached.

----- ----- Content
The Holder will be shipped with 4 screws and pictured instruction in different languages.

----- ----- Installation
Preparation:
First, the cell phone holder must be attached to the ProClip. For this purpose this with the enclosed 4 screws attaching the ProClip (sold separately) is attached. Here I would have liked to see more innovation: on the one hand you could have solved the attachment between ProClip and Mobile Phone Holder elegant, on the other hand, there were no pre-drilled holes in the ProClip. So you have to turn purely with much force the screws.
Since you have to invest for both elements more than 40 euros, I prefer at this point from a star.

Mounting in the car:
Varies depending on the model.

Note:
Before being screwed, glued and fastened, one should keep ProClip + Mobile Phone Holder + Mobile "dry" to the point where it is installed. On my Galaxy S3 of place in my Ford Fiesta (ProClip for the left A-pillar), the cell phone holder was sorely limited, so I have the ProClip rather attached "above" (one has a few cm margin at this point) I have attached the upper right corner on the ProClip. Thus, just plenty of room left to plug the phone into the cradle and infect down the cable for AUX and electricity.

----- Operation / handling / processing -----
The mount comes with a tilt swivel so that you can align the phone horizontally or vertically. The slope can also easily adjust.
The processing is slightly flawed. The phone slides between two rubber guides into the holder and inserted relatively tight, without the phone will be damaged. But these rubber leadership was ausgefräßt not completely clean (in my bracket). That does not come as much weight as this only stands out on closer inspection.

----- Conclusion -----
Recommended!
Prior to purchasing, one should remember that this support, unlike other can not simply be taken in another car. But since I do not often change the car that was no argument for me.

Ordered at Brodit24, Shipping Duration: 2 days via DHL.