CSL - HDD / SSD drive cage for Notebook | supports SATA III (SATA 3.0) | for SSD / HDD (Serial ATA (SATA) hard drives) | HDD Caddy / upgrade set Bootable (Electronics) 5
CSL - HDD / SSD drive cage for Notebook | supports SATA III (SATA 3.0) | for SSD / HDD (Serial ATA (SATA) hard drives) | HDD Caddy / upgrade set Bootable (Electronics)
Comes neatly packed in a small box, and even includes a mini screwdriver for fixing grub screws that hold the hard drive side. Bezel is only plugged and is exchanged for the aperture of the original torch (pocket knife blade is sufficient for two) from developed burner is still the holder remodeled (in my case a small plate with tab for a fastening screw) then comes behind the built-in hard disk as defined by the set plastic clip, insert a screw purely done. Duration approximately 5 minutes. habs 2x times made because I first have pushed the SSD, then run migration software that writes the operating system on the hard drive and then original hard drive to SSD - Replace each space. You do not need an extra SATA-USB adapter! Did Although a, but the Samsung 840 EVO was not recognized. But was not on the USB adapter but on AMD Chipasatz AHCI - the driver is absolutely against the standard Windows AHCI driver in the Device Manager (driver update manually from a list!) Must replace. Only AMD processors not Intel! So you can be if you do not 2 hard drive space in the notebook as the newer common today save the more expensive notebook set of SSD hard drive because this case has anyway to replace the burner in the notebook. Certainly works very well and I kann`s recommend!