I run the link to a PS3, from there the image on a 1000p FullHD (3D-capable), to a 1800i Beamer (10 meters cable) and another 1800i (with 15m cable !!!) will be forwarded. I use the medium to high-quality HDMI cable.
+ Beautiful high quality translucent processing
+ Automatic Realize drying of the signal is working properly
+ Image sound quality can not detect weaknesses
+ Works even on a 15M cable, this being technically not guaranteed by manufacturer.
- The blue LEDs which characterize the active compounds, namely look pretty, but a dazzle. Are much too bright and I had to taping. Looks in turn from ugly.
The technical data, and how far they are at, I can not judge ... BUT
Quite clearly it is said that the device is capable of 3D.
- This is not the case. The 3D signal is funneled through, but the splinter in itself is not recognized at the PS3 as a 3D capable device. So you have to configure the PS3 completely without fragments, and use the Splitter only afterwards and hang in between. If, as are driven in my case, even 1080i devices, one is faced with a major problem.
Therefore, the significant point deduction. For the price the device is okay. If you work only with 1080p, you get even by PS3 a continuous 3D signal, (only reveal as I said before the 3D display, and then change any more resolutions).
As 3D capable, I would still not apply it.