A good blender

Visually at first really great! Clean design and it really what makes her! You can also grill very well with him.
For many, and not enough for many flat. The thin sheet is not necessarily a drawback. In my grill everything except the carbon sink everything just stopped. Much has been already described here, but I would like time to respond to a number of technical matters. The nuts and bolts, and washers and spring rings are of poor quality. Although adequate, but the washers cover the Bhrung more from insufficient. The screws have rusted in places with me in the blister pack, I completely incl. The axis against VA exchanged. Of course, the same washers exchanged for something bigger.
Cheap act the pressed-threaded sleeves !!!!!! If the screws to dress too tight here, then it can happen very quickly, they rotate itself when tightening, but at the latest when re-releasing. And then no loosening or tightening is no longer possible without destroying !!!
The holes in the brazier are actually as an illogical thing! Too far apart, so that the ashes actually falls on Ash's plate. If you open the lid too fast during grilling, the intake air flow for an ample Ascheverwirbelung.vorwiegend provides course on's grilling.
They are thus far the two stars that I may depart.
The here often criticized for low edge at the brazier I can only confirm !!!! In particular, it is even more significant when this grate when grilling also still bulges outward and thus the edge appears even smaller!

A help in assembling needs no wirlklich. The time from 1.5 to 2 hours is realistic and should be taken into account in any case with plenty of good beer. Then makes it really fun!

After the first baking, but you should pay attention to good charcoal. I got the first time affordable taken (additional gift when buying) and I've always gotten. For those who do not have much experience with charcoal ....
Not only the grill is important, but also the charcoal is crucial for a good grilling result !!!

In conclusion: I do not have this grill at Amazon ordered because I have read too much negative to say about the type of packaging and the supplier. I have this grill under the name "Mr.Gardener" bought from the Hagebaumarkt. But comes from Tepro. Even standing on the box! No part was scratched or warped, even though the board had some cracks and tape.

For the front feet even 4 plastic caps instead of 2 here.

The brazier can be run properly up and down. The so-called train in my opinion is not so special!
I've already experienced much efektiver Weber,

The fold-out table is very stable. All connections fit perfectly. For 149 a very good price performance Verhältnis.Klar .... He is not Weber ...... But he's still a stunner.

Addendum: Now after more than 30 times in all Variatonen grilling, the brazier has so greatly distorted that no longer is the up and down cranks possible. Only after the disassembly and provisional Align it is reasonably functional again. The problem is simply due to the 1mm plate and riveted it thin sheet guides. Here I will definitely own
Rost construct.
Considering the now work involved and the cost, I could have the same buy a Weber.
Grilling itself is coconut coal nevertheless still a stunner!