This is a home craftsman tool. Who before was to build a house, tree or a child witness should planting grab a little deeper into their pockets.
I will not go explicitly individually on each tool a but to those which seem to me important and constantly in use (abuse) were. Or rather the tools that were really in continuous use!
Endurance test:
Uhuuuuuuuuuund we jahaaaa have taken the tool well forth. The poor Dingelchens had a lot of us, unfortunately, but hallohoooooo!
Thus we have:
1 Picket Fence 74m and 1 63m garden fence made of metal so screwed!
2 greenhouses!
3 balcony railing off and re screwed!
1 canopy!
Roofing of balconies and off-again screwed!
16 shelves screwed!
Miscellaneous stuff like hood. Coat hooks on the wall, wooden boards, sockets, etc. screwed!
Our shopping list after we have so 1200 screws in the size of 13mm, 14mm popped, 17mm and 19mm across flats on. Handful more or less does not matter.
Smaller self-tapping screws as approximately 0 - heaps in all sizes.
The house was newly plastered and a radical overhaul. So ersma had everything around wech because of the clutter was totally rusted.
SCREWDRIVER:
The screwdrivers are of acceptable quality and even keep what from. Even the back of the handle opening can be used for something to push through and to use as an extension. But here it hooks already been out a little. The screwdriver twist then already being felt. Wage doubt times that really stuck or rusted bolts firmly to solve it.
It is well intentioned on the handles the knurled areas. But who will be screwed much quickly realize that you get sore fins over time.
Smaller screws are not a problem but with larger problem lies in especially if you have large hands. The handle is then namely unsuitable enough force to properly apply the screws to pop or to solve!
But choke Spax purely tried then let it go. Cordless Screwdriver is better, one hundred per cent. But if necessary, does not go well .... the only long wait!
RING / FORK / RATCHET KEY:
Good decent quality. Since there is nothing much to complain about except for the ratchet wrenches. The two sizes 17mm and 19mm tend to excessive use to after some time to wiggle. Initially, no problem but then for fixed screws or if I want a screw really popping on I run increasingly in danger of slipping. The more the use of the side game is the more problematic it is!
Really not suitable Ergo for continuous use. But this is indeed a ratchet including bits on board!
When disassembling the two fences that ring key really came to its limits. Because the screws of the posts were well rusted. The fence itself is not screwed apart. Since Babba TORCH was used!
CRESCENT WRENCH:
That is for me really only a stopgap, if for example the nuts or bolts are Köppe vermackt. Only there is a slight problem here. Because of the adjustable jaw is too much play. If one tries to solve a mother with 12mm wrench size so that it is not really a problem. If the mother is not already vermackt and the edges are rounded. If so, then I use this part here. But this does not go. In application of force of the jaws are after and the mother finally the rest. For screws with larger key size no problem. So only conditionally applicable!
HEADS:
They are of good quality. The handles are okay. Unfortunately, close the jaws plan not one hundred per cent. So not suitable for small work. The Wasserpumpenzange was totally scrap after 2 days. You read no longer be determined. The joint was over. But could have also been a flash in the pan matter. Hab still with any tool suitcase I bought replaced first the water pump pliers.
Then the other thing. In the fixed screw I put on the handles of water pump pliers pipe pieces as an extension. This can not be from any pliers!
Must their vindication but add it was some time in the driveway and there was probably a couple of run over times. Whether the reason for the failure was total now, no idea. So my old (water pump pliers) was pretty often run over and it has harmed her nothing!
Nu everyone can seek out what you broke the iron cross. Either running over by a rickety metal carriage or the balancing with pipe sections as an extension.
Possibly moving Both?
No matter it was over .... and here is one of the sole success, nothing else!
The diagonal cutters were able to test anyone because of somehow went verschütt on the first day. No one knew where and how but no matter. This happens just once and was not the end!
The color of the handles but reminds me very much of a now very cherished manufacturer of namhaftem brand tool!
RATCHET, BITS & Co .:
The ratchets itself are all ok and of good quality. The arresting sits and does not dissolve themselves. Even a fall from 2-3m height makes them from nothing. At various Billigheimer the items of ratchet kannste then down on the floor on all fours crawling klauben together!
A pleasure to use. The handles are in order and also work longer so that is no problem. Also screw is correct so popping fixed no problem. The ratchets can from the loose.
The bits can also so a lot from. Are meticulously crafted, precisely so not too much play. What manifests itself in tight screws. The extension with T-handle is well used especially in tight rusted screws. Dear access for releasing it back. So the ratchet lives longer.
Bits are secure and fixed on the square of the ratchet. Even after several changes in miserable, dirty-dusty conditions was nothing to remember, that this will change anything.
The compilation confused me a little. If the tool set for home craftsmen put together?
If so, which home craftsman needs a 30-Nut?
Besides he operates machine / steel construction and as a home crafts!
But these of these areas comes with this tool one hundred per cent to its limits!
But always good when MANN it!
THE SUITCASE:
Here was probably the wishful thinking, huh?
After 2 months was due to the really good. Well I heard that some people who put not from the tool but pepper it carelessly purely in the box. Partly also from 2345m distance or so. Say, the stakes did not survive the operation. The wheels were also well. They no longer be rotated. So constantly dust, dirt and moisture can not well off together.
A stair fall over 2 floors, the crate while survives but since then the lid closed no longer correct. Besser said he was slightly warped. Waterproof, it is not. Once let stand outside and forget. It had begun to rain heavily and after 3 hours was already a wet puddle inside the box to see.
When the temperature changes, such as 25 degrees during the day and at night 5 degrees the next morning, the tool is damp and moist. It is advisable to lay eh a handful silica bag in the toolbox pure.
In addition, I tend not gentle remedy a toolbox. I let it just fall. In this case here come off now and then times when such actions, the closures and the cap jumps up!
Have a polished concrete slab with a grinding machine and the tool box was in the immediate vicinity. Then the telescopic handle a read only by force and out because he had powerful hooked and clamped. Take a bath in the shower (not the box I) has solved this problem for a short time again. Eeinen day later, it was again the same way. Obviously particulate matter is not really the friend of this toolbox.
Very happy I did but the geschrottete part photographed my buddy a full-choleric before the Lord has emptied the box and a few run over by vans times. Then disposed of in the garbage ..... toolbox net the van.
The remaining tool got a new home in schnuckliges Aldi bags. Good choice, because only so the craftsman can flay with his fellow impression. Thus the overall picture of the choleric professional craftsman is rounded and gets the final touch overdone!
Werd me soon also this set but ordered separately normal tinny toolbox. Because when working annoying this constant back-and Hergepacke the stakes enormously over time. Suitable for someone who needs time blue moon tool. But this constantly re-sorting of the inserts I do me really not on!
CONCLUSION:
The tape was after 2 months, well, as I do. After take off on 4m it no longer wanted to Schneckenhäusken back and I had to push dat lazy Trumm hand back again. Did I leave the thingy then fall and missed him a hefty foot kick. Had nothing been in the way I would have one hundred per cent of my good old tape-shot record broken. So the flight was abruppt and braked loud clanking and I was (even had) also appoint a new window yet!
As we have fiddled forth the tool that excels in any case the normal home craftsman-use. Alone solving almost 280 firmly rusted screws on the support posts of the 2 fences demanded the tool from a lot. Nevertheless, it has survived the application. Although with quirks and clear use tracks.
Incidentally, the water level has kicked my buddy immediately after purchase in the bin. Because in direct comparison with its two precious water balances was clearly a deviation from 5mm to report.
The role of tape has thrown our short electrician before the Lord to the purchaser of this box to the brain and to something shouted unintelligible. It probably had overpowered the joy, so I suppose the tape was somehow okay!
Give 'but 4 stars with reservation. The reason the rate is here. 99Euronen are okay but slip something by okay. The original price is not worth it. Because for 300 euros I expect a lot more, really!
Since it would have 2 stars hailed mercilessly.
Expectant renovate my breaking hut in Italy next year. Since I order this tool and leave it there the same email. So I save this miserable transport of the tool.
Only I take with a set of precious pliers.
Isses then by good? No matter ... the price of this quality can not be beat!
