Packed this pavilion is little space-saving, so that it just so fit in my compact car without obstructing my view. Unpack and lay out the items went smoothly, everything is numbered. The instruction is in order. The construction proceeded with 3 people in about 20 minutes. Unfortunately, the construction of the fixing of the film is concerning due to understanding problems. Slightly torn one side of the sheet at the bottom of the rod. Has kept the construct nevertheless.
The festival weekend offered all sorts of weather conditions, so a thorough check was possible. You have to say that we did not use the original pegs / pegs to attach the ropes, but extra stable at hardware stores have knotted (on 2 pages) and the other two sides of the ropes with a solid fence. As a "redundant backup" We have used the original pegs even as mounting the linkage (toward the floor) - these were torn but immediately out of the ground in strong winds (only thanks to the ropes by the extra strong pegs (DIY) or fixing were held at the fence, the building is not lifted). The film has only after about 20h (almost) continuous rain passed a few drops. The water dammed up in only one place on the surface and needs to be decanted off and. He can also keep well without much heat build-sun. In wind it was very loud, but stopped. The size is just enough for 3 people and the inputs of two tents.
Despite the small crack of the film and the useless pegs we have packed the pavilion again and will use it for the coming festivals again. For 20 euros you can absolutely no longer expect - top! (But you should really invest 5-10 Euro in stable, edged pegs from the hardware store if you do not want to stand out!)