Good LED strip at very low price

I ordered a roll warm white and a role cold white LED strips to use this as a convenient, easy-to-install light sources in the model. There are 300 LEDs on a 5m strip tape, all three LEDs, the strip may be easily separated with scissors. By means of two solder pads at the beginning and end of the triplets can be joined together separated strips, unless you own a soldering iron. Alternatively, up to three separate strips with the accompanying two terminals can also connect without soldering. At the beginning of the whole LED strip a jack for connecting a standard power adapter, etc. soldered, another jack with terminals located on another strip section with its own power supply in.

The color temperature corresponds to the usual values ​​for warm white LEDs (3000 ° K, comparable to an incandescent lamp) or white LEDs (6000 ° K, comparable to a fluorescent lamp). The brightness of the LEDs is absolutely ok

For my application, the model I have reduced the flow by means of constant current source to around one twentieth of the usual operating current and thus reach almost exactly the luminosity pre-assembled lighting at a fraction of the price of such prefabricated modules.

The LEDs let Unsolder Also, if a single SMD LED is needed here and there. The price of the Strip, the always worthwhile. The leftover strips I use for indirect lighting in the living area, so I have double benefit.