Negative
Manual incomplete!
The 3 circles on the right edge of the display are nowhere explained in the manual but are important when it comes to the programmed times and work
Buttons can be easily affected and so you shift, even slightly something unintentionally ...
My case ...
Timer bought it for 40 seconds 2 times a day, the spray system in the terrarium and off again.
Therefore, the exact seconds setting was important (smallest time unit Minute was not "small" enough).
- So Unwrapped,
Expanded operating instructions -
- Clock and date set. Prima works.
- 1 programming interval setting: every day (ie every day Mon - Sun selected) + ON start (11:00:00) off the end (11:00:40) HH: MM: SS. Prima works.
- 1 programming interval setting: every day (ie every day Mon - Sun selected) + ON start (20:00:00) off the end (20:00:40) HH: MM: SS. Prima works.
- Connected To test lamp would then have the light so for 40 seconds to go and then off again. -> Lamp on so went in "ON" in "OFF" to "AUTO" eingstellt and waited ...
Time came ... lamp failed to materialize! :-(
Appears in the display was all right 3 circles the lower dark the other without filling "
Then clicked together on "Week" and "Hour" upper circle disappeared. Display mode was set to "Auto" (= programming) .. and lo and behold, even the upper circle hidden it comes!
Prima works ... :-)
But for a word what you have in the operating manual changed it and what the other 2 remaining circles mean and how to turn off the from and why and ...
Not now after 7 days back on the clock "from" or something ... no idea
In my time testing it has now worked for it ... but the result is naturally unsatisfactory (one I must be able to rely on such a switch!) And therefore only 3 stars!
