the VLB200 for my Heco Victas've bought 302.
The positive vornweg: The boxes are on the wall and keep quite stable.
negative:
- The screws for wall mounting are of billigster quality. The Phillips screw heads (Pozidrive) are so bad the milled a real force transmission is excluded. 2 of the screws inserted in the wall mounting in the dowels approx 1 cm in front of "the end" fixed and could be neither more nor pure pull out because all the bits by shooting. Here I would advise to purchase ordinary screws (possibly with Torx). Honestly, the screws already looked around crazy when I have taken them from the pack ...
- The build quality of the materials is atrocious
- A part of the plastic tabs on the panel were defective already upon delivery
- Speaker cables must be laid with a cross section of 2.5 mm² or greater within the holder an absolute spasm!
- For the horizontal alignment there is no locking
Since the Victas at the back are quite narrow, the trick with the coin did not transpose correctly. The boxes were then fixed incorrectly. Therefore I have taken blemishes of boxing in buying, are also only Victas ...