Why pay more? This part here is just awesome!

So ... first of all BEKO! Some have a problem, a Turkish producer of white goods. Me not! :)
We already have a dish of this company for some time in operation. And absolutely no problems.
The dryer is with us in the small guest bathroom on a 15 year old privilege Waschmasschine. This was planned and is absolutely not a problem. The dryer should be able to lift alone. The device weighs just 30kg. On an intermediate frame we have also omitted. The washing machine has to privilege the lid a small raised edge already completely sufficient to fix the dryer. The dryer itself runs very round, absolutely no fidgeting like a washing machine during the spin cycle. By the way, now throws the washing machine to the dryer quiet under his belt! :)
We deliberately looked for a dryer, which has the grease drip container attached below. If the dryer will be available at the World Cup, the container is then in a very pleasant working height.

To dry yourself:
Naturally, the device does not work silently, but with us it is on the first floor of a building in the quiet vineyard. I've even with the windows open and dryer operation placed outside the house under the window and it was in no way annoying, really hard to hear. In the apartment, the dryer is separated by a bathroom door and a glass door to the living room. This part is no longer heard in the living room.
We have all sorts of dried laundry up to vollgestopten charge with towels and heavy bathrobes. The stage "cupboard dry plus" ("cupboard dry extra" would be the driest stage) is enough for this case absolutely. The laundry is then also furztrocken. With this level you also get the thick fly ranges from jeans dry, apart from the fact there are Jeans for its own drying program which also works great.
T-shirts and underwear do you get to the stage "cupboard dry" dust-dry! The drying time is always surprisingly short. Although the programs have a target time for the operation, the times are usually undercut. The dryer has several moisture sensors. And when the clothes are dry hear that thing on and just does not work fixed hours off. As a result -> The drier the laundry is packed into the device it is more quickly done. So our WM can fling with a maximum of 1000 U / min, while the drying process is usually completed in 1 h. Who can fling before 1400 rev / min as safely expect even shorter drying times.
The respective moisture levels reached will be displayed during operation with LEDs. Thus one can estimate how long the fun will last.
Unlike some other reviews I could absolutely not pushy / chemical (plastic) perceive smells (despite the small bath room). Yes, the room is very warm. But that's normal, it is indeed a Kondesationsprozess. This means to work optimally, the dryer needs to cool intake air in Kondesator the warm moist air from the drum to cool and on the discharge side just comes out the warm air drum. So ideally, you can just open the window.
The fact that we want to operate the dryer only in the periods in which the drying on the balcony is not possible, so the cooler seasons, this situation very congenial.

A little tip I have for maintenance. The lint filter is in the context of the drum door and is plastic to plastic each other blunt and hard. This allows already some fuzz rather the way the screen to find over.
That's not good in the long run. Because they can also pass the condenser and perform at the level sensor for the condensation to misreporting. Here's my tip:
To use the opening of the screen there is a groove in this one can use a 3mm O-ring rubber or who wants to make something with a delicate silicone line pull (The latter I have chamber - works perfectly with me). Why Bother? -> As soon as the tank is full - or just falsely reported as fully presents the Dryer its operation. (Normally, after emptying the tank just press Start, and already the process proceeds smoothly. The tank is large and therefore it is so far occurred at us more than once.) To the sensor which then in Flusenfall brings the error message you get not so simple Ran! Therefore the evil avoided just prefer.

Admittedly, the device has no display, which holds a chic place or the other in a modern device indispensable. But what also? What I use an estimate how long could the part are still running or running that program now? 1. The program I see the setting switch. 2. As long as he needs to dry it needs now times (Also I can see the current humidity level in the LEDs) and 3 theme time delay - I use not for large appliances grundsetzlich. Either I'm at home and wash and dry or I'm not at home and I do not want any devices do things I have no control.

Conclusion!
By me / us an absolute buy recommendation

After about 4 months:

still everything great, I regret the keinemn on case. Always use the setting actually "closet dry". Since everything is always really cupboard dry! And how long that takes then governs part on the sensors themselves.
For the sealing of the lint filter, incidentally, a 3.5mm silicone tubing has been found to be suitable allerbestens. Simply push into the groove and all is well. A 4mm silicone tube goes well.

After nearly a year of regular use:

Still no problems. After each use, if I take out the lint filter for cleaning I also look the same times in the opening as it looks with fluff before the condenser. Much comes on screen not over because I have sealed the Siebsitz with silicone tube (see review above). If necessary, I'll take the condenser out and rinse it off with the shower and then let it stand for drying. I do this because I believe that fluff verurssachen definitely trouble in the end of the condensate trap and the closure of the condensate tank.

But my unchanged Conclusion: strong buy recommendation!