Property me these switches increased by my satellite receiver, Blue Ray Player and My Apple TV 3generation my Technisat TV to connect.
When Apple TV 3generation the automatic switch off circuit works on the TV no longer as this, even if it is in standby mode, the corresponding signal does not switch off.
Once a device is woken up from standby, the Ligawo automatically switches to this unit in order without the previous device must be switched off.
eg:
Turn the Blu-ray a player, the TV automatically turns on and switches to the HDMI input 1.
Blu-ray Player is the entrance 1 in operation, start the satellite receiver at the input 2, the switch automatically switches over to the input 2.
Switch the satellite receiver at the input 2 from again, the switch automatically switches over to the Blu-ray player at the entrance 1.
Turn the Blu-ray player from, the TV automatically turns off
Have me on this switch also two new HDMI cable
Bought psc = 1;: Link
Is supplied with the Ligawo 6518857 HDMI Switch:
An HDMI Switch 3x1 4K 3D automatic / IR
(Switch can be installed as not visible) A 1.6m long Infrarotempängerkabel for remote control
As a power supply a 0.8m long USB cable with 2.1mm 5VDC 500mA power plug is used
A remote control to manually switch the individual inputs
+ Very small switch
+ Well-fitting HDMI connector
+ LED display to indicate the HDMI input of elected
+ Automatically detects which device is turned on, and switches to this
+ You do not need remote control and no additional Infrarotempängerkabel
+ The switch is supplied simultaneously via the HDMI cable with voltage
- The power supply via the HDMI input cable, not the TV automatically switches each device on or off
- Automatic on-off switching of the TV may not work with the Apple TV 3generation not, the switching between the individual inputs will continue to function without problems