+ They seem solid installed;
+ The insertion and removal of my Galaxy Note 3 works very easily;
+ Jaws jump on a button - it can also record wider equipment or the Galaxy Note 3 with various cases;
+ Very good value for money (. 17,42 Euro incl. VAT), compared to other products;
+ Holds well on the disk (I have not tested the supplied etc. '' plate '' to stick on the dashboard - on this '' plate '' you can attach the suction cup as an alternative);
+ Can be sufficiently swivel in all directions on the ball head (for me);
+ Not adjusted by normal vibrations while driving;
+ Good description in many languages (though with a very small font size).
When unpacking, I asked myself, what you probably need a small manual with such a simple product - but then I could see the description of some interesting tips: for example, that one about every 5 days to resolve on the disc and re-attach the suction cup Otherwise, supposedly decreases the retention effect. Also, there recommended to replace the suction cup after 6 months - but I wonder where you could probably buy more ONLY the suction cup as a replacement part for a reasonable price ...
- What I do not like so well, is that the clamping jaws, the tap in the edge region of the screen keyboard difficult - at least for vertical use. If I upside may establish the Galaxy Note 3 and then turn the bracket upside down, the onscreen keyboard is indeed freely available, but the phone would slip out by driving vibrations thanks to its smooth frame downwards prevent (this could be with a little tinkering but surely ).
For my needs, it is OK that the holder does not contain a built-plug - people who also other power connection for each drive or each insertion + remove the phone and want to mark out, should look at alternative holders with built-in power supply. This protects my opinion, both male and female, and the nerves.
Addendum of 22/10/2014
I have identified the following dimensions of my model:
Clear width of the base plate CLOSED: approx 62mm (rubber inserts the jaws do not quite up to the base plate zoom!)
Clearance width between the front edges of the jaws CLOSED: approx 52mm
Clear width of the base plate OPEN: approx 95mm
Clearance width between the front edges of the jaws OPEN: approx 85mm
If you have a device that, for example, is 95mm wide, so you can probably use this support in the following ways nevertheless:
Insert unit from the top and remove it upwards -;
- Device '' diagonal '' plug - ie for example only insert the left edge smartphone, then follow up on the right edge smartphone
(It rather than hanging down and to avoid tipping backwards, how do I do it with my Note 3);
- Spreading the jaws something - they have because of the sliding mechanism some play;
- The rubber in the jaws remove, or exchange them for thinner material.