No steady Firmware

No steady Firmware

Surveillance IP Camera Tenvis JPT3815W - motorized IR IP Camera Wi security without sensor inside wire CMOS 1/4 "300,000 Pixels - Pan & Tilt IP Camera with night vision - Computer Visualisation smartphone and tablet anywhere anytime -Detection movement - Bidirectional audio - free DDNS (Electronics)

Customer Review

Installation OK. Configuration; way, knowledge can help.
Wifi side, WPA2, the key normally can do 64 bit, which is not the case. The camera can register. I had to put a shorter key !!! Otherwise here after not work too badly. Image quality side that is not bad at all if the light is correct. The evening here is deteriorating seriously. The camera has concerns to switch to infrared mode. This is not configurable in the firmware. The power of infrared leds is really too fair, we must pass less than 2.5m / m 3 in order to see the faces. A priori it has the latest firmware. The Forum Tenvis seem too busy, but the admins seem to respond to status (it takes a relatively long mail address to sign up). The Web-interface of the camera is more than "lègère". On the manufacturing front is okay but not great, considering the price is still acceptable. The big negatives for me are especially the lack of stability firmware for almost a week that it is in the testing phase I have to restart more than once the camera because I had no access to video (firefox, chrome or Android app that does not work too badly indeed once launched your LAN). Side setting, I do not tune recording on an FTP server despite my knowledge and many tests and I do not seem to be the only from the forums that concern when older versions. I have doubts about the quality of food and / or plug on the back of the camera, she has already reset by touching it a bit! For the firmware update is vital. I should recommend others to improve the scope of my surveillance video but I confess that I hesitate a little to the choice of model now. The stability problem should be solved especially imperative.

Well after many trials I resolve to return the item. After digging a bit diagnostic camera seems stable if we deactivate the alarm which not necessarily useless. In fact, when the plant's camera is the video stream party crash, because it still has access to the configuration of the camera's web interface. In short shame because when she walks is pretty decent.

Cover with good design! Rank: 4/5
March 22
Very reliable and fast Rank: 4/5
November 19
Kobo Glo Touch Rank: 5/5
July 30
a little disappointed 14 Rank: 1/5
August 29
impeccable handle 1 Rank: 5/5
November 10
Super for its intended scope Rank: 5/5
September 1

Related Reviews


There is a lot on offer. Update: Firmware 2.0Olympus E-M1 OM-D Systemkamera (16 Megapixel, 7,6 cm (3 Zoll) TFT LCD-Display, Full HD, HDR, 5-Achsen Bildstabilisator) inkl. M.Zuiko Digital ED 12-40mm Top Pro Objekitv Kit schwarz (Elektronik) With alternative firmware tip!Netgear RangeMax N300 WNR3500L-100GRS Wireless Router (Gigabit, USB port) (Personal Computers) Firmware limited and unstableSHUTTLE NAS Omninas KD20 Barebone PLX 7821 / 750MHz (Personal Computers) Good hardware bad firmwarePhilips SA4VBE04RN / 12 GoGear Vibe MP4 Player 4GB (4.6 cm (1.8 inch) color screen, Philips Songbird, Like Music) red / black (Electronics) High temperature, loud buzzing noise, no firmware update possibleTrekStor DataStation maxi light 3TB external hard drive 8.9 cm (3.5 inches) USB 3.0 Black (Personal Computers) Perfect for the intended purpose - review for new firmware and new app versionJawbone Bluetooth UP24 Activity / Sleep Tracker Bracelet (Size L) orange for Apple iOS and Android (Wireless Phone Accessory) So-so, low-cost solution with unripened FirmwareWD My Cloud Mirror Personal Cloud Storage 8TB (8.9 cm (3.5 inch), dual-drive NAS) (Accessories) Second microSD card In GoPro HD3 Black with Firmware Update deffektSanDisk SDSDQUA-064G-U46A Mobile Ultra microSDXC 64GB UHS-I Class 10 Memory Card + SD Card Adapter + Memory Zone Android app up to 30MB / sec. Read (Personal Computers) Perform firmware update for large fast CF!Transcend All-in-1 multi-card reader (SDHC / SDXC / MSXC, USB 3.0) Black (Personal Computers) Great monitor when one has V2 firmware.BenQ XL2411Z 61 cm (24 inches) 3D LED Monitor (HDMI, DVI-DL, VGA, 1ms response time) black / red (Accessories) Good with new firmware V2_20131209BenQ XL2720Z 68.6 cm (27 inch) LED monitor (DVI-DL, 2 x HDMI including HDCP, 1 x USB up, 3 x USB down, NVIDIA 3D Vision 2-ready. 16:. 9 Full HD) black / red (Accessories) With matching firmware update also SDHC cardsHama Card Reader Writer 19in1, USB 2.0 card reader (optional) Quite OK but really well only with (foreign) firmware of devices with the same chipsetTyphoon TP005 Game Cinema Media Recording Box for digital / analog AAC (Mic-In, USB 2.0, Full HD) (Accessories) With proper firmware function properlyAVM FRITZ! Box 7390 Wireless Router (VDSL / ADSL, 300 Mbit / s, DECT base station, Media Server) (Personal Computers) Samsung's SSD Series 840 EVO - Firmware Bug reduces read speedSamsung MZ-7TE1T0BW Series 840 EVO Basic internal SSD hard disk 1TB (6.3 cm (2.5 inches) (1GB cache, SATA III) metallic silver (Personal Computers) After firmware update by manufacturer Samsung defectiveSamsung Basic MZ-7KE256BW 850 Pro SSD 256GB internal (6.3 cm (2.5 inches), SATA III) Black (Personal Computers) Works flawlessly with TZ10 Firmware 1.1mumbi Premium Replacement Battery for Panasonic Lumix DMC-TZ6 / TZ8 / TZ10 / TZ18 / TZ22 / ZX3 (accessory) Super facilities, super price, great technique, sloppy FirmwareXoro HSD 8450 DVD player (HDMI, 1080p upscaler, card reader, USB 2.0) Silver (Electronics) Hardware defective after about 28 months Firmware badFantec 3DS4600 media player (3D 3D frame packing, eSATA, Full HD, Card Reader, USB 3.0) (Personal Computers)