found on Amazon quickly a favorable price, the whole settlement, until I had it happened very quickly. Thanks for that.
To The Product. Anticipation, my first impression is positive.
One should note the special property of the paste. First, I have a small dab is applied to the CPU (i5-2500K) and spread with a spatula pretty thin over the entire surface. You can also take a plastic card, then it is easier because of the width. And I then realized that the paste was dry and let himself rub crumbly. In my experience, however, it should stay as long at least soft until the pressure between the CPU and heatsink mounted has pressed optimally into the tiniest bumps (but whether this also works with a powdery consistency, but I can not comment).
When I use the Intel Boxedkühler (temporarily, if I know what should a silent possible cooler episodes) took to the mounting of the package, I realized that this is no flat ground has (since the paste can of course not for), so I ado still small dots of paste mustered at corresponding location directly on the cooler ground and then assembled the whole thing.
Despite that I have now probably a bit too thick layer of paste on the CPU, the temperatures even in 3D load around 35 degrees (no, not a Prime and Co., but real game application).
Thus, the paste serves its purpose quite well. Nevertheless, you should look at before the Kühlerboben exactly (with me so application error) and mainly work quickly, the thinner coating the paste.
I give the paste four out of five Punken because it does its job, but is somewhat more difficult to handle due to the quick drying.