Support marshmallow over Barbie doll toy tool for adults.

Do not get out of St. Cyr and Polytechnique to understand that this cheap support, which has lots of nice blue and gray plastic, can not perform precision work. Raph is right, but not only him, all the other serious DIYers of Amazon in Germany or elsewhere, which confirm that drilling drills move up to 2mm when we pressured.
Those who give 5 stars to this machine are certainly in good faith, but do not tinker too seriously or are in their first support and are glad to make a hole in a board without holding the free hand drill.

So what is the right solution?

Skip to Dremel standard 43mm collar to mount in any industrial support, since these are standardized to 43mm in diameter.

As for me, I applied two solutions:
- My 2 Proxxon IBS / E that have a 20mm neck on supports Proxxon MB 200 (20mm diameter) and BFB 2000 (43mm diameter) with a necklace 20mm / 43mm,
- My Dremel 3000, 4000 and 8200 shortly two that I just ordered, with screw clamps and an outer diameter of 43mm on universal support BFB 2000, which is very sophisticated with the addition of a milling table KT 150.

The support Proxxon BFB 2000 probably exceeds da needs most handymen, costs 208 Euro here, but is found in Germany at Amazon from 144 Euro + postage. It is an ultimative solution that allows both to use Proxxon, Dremel or standard drills of any brand and make the drilling, milling, polishing etc. because its diameter is standard with 43mm. This support can tilt in all directions on all angles, but it is expensive.

The support Proxxon 200 MB is much cheaper because it costs only 76,50 carrier (60 in Germany). It is of course entirely in metal and adjustable horizontally, diagonally etc.
But it only accepts drills with a 20mm neck, so Proxxon mini drills.

Fortunately for owners of Dremel, there are smart kids who invent solutions: Some handymen well equipped with digital machines, manufacture adapters with an outer diameter of 43mm and an internal thread Dremel that allow to screw them in drills Dremel and Dremel mount these (like the models 3000 and 4000) on standard media of any kind and at competitive prices. These are usually retirees who make from time to time some units to make pocket money. I have 4 different or Models and they are all very carefully milled in the aluminum blocks. Their price varies from 11 to 15 Euros depending on the model plus postage.
They are found in ebay Germany giving as research "Dremel 43mm Adapter".
This avoids having to use Dremel 220 is a branquignol support and a really primitive solution and only valid in case of emergency.

Once we have these necklaces Dremel / 43mm, simply unscrew the collar of the Dremel 3000 or 4000, to screw the adapter and wedge the Dremel with this necklace in the standard support. It takes about 30 seconds.
There was good material that makes holes or you want and not a medium that contortionne as a patient who is appendicitis or brush marshmallow.

Those who believe they have made a deal by purchasing the Dremel 220 coupon carrier 39 Euro will realize the day when they will need precision, that this support is more a toy than a tool, and it has its place in the children's room with Barbie and Ken.