1. noticed the same positive when unpacking: All lies.
- All screws and plugs you need
- A mini spirit level
- a pencil
- And of course the bracket itself
Also liked that the holder arrived already assembled and I did not have to screw first 10 metal components to one another.
2. The assembly is very simple. I did it alone in 15 minutes, I would like someone had occasionally been holding me what. Next one needs to be mounted:
- A drill and a drill 10 for the plugs
- A Phillips screwdriver
- A 13mm spanner or preferably nut ratchet +
Unfortunately, the assembly instructions was really not very extensive. A handful of pictures and that's it. But more is not it.
- Drill the holes, plugs pure and mount screw.
- TV set on the front side (the best on the sofa) and screw the 2 rails. (For the countless screws. Searches are you fit in the, the rest is left)
- TV Hook (easily) and secure with the 2 small nipples.
Finished!
Negative noticed:
- After installation you can set the TV to the round rods (see picture) to the left and slide right. This can be useful, but unfortunately there is no way to fix it at a position. So he slips always a bit if you really want to adjust only the arm.
- The template has not punched all holes. The lower one has even Mark and pierced. The missed somehow the purpose of a drilling template.
Positive noticed:
+ The support makes a very solid impression
+ It does not work wobbly but well done and can still be adjusted relatively easily
+ Adjustment without screws to loosen and then tighten again. Just pull and press and television moves.
Clear recommendation!