Done its job quickly and a more than reasonable noise. Easy to clean.

Firstly it has a solid appearance.
It has a design somewhat clumsy but all the elements really seem to last over time.
Warning, this is a device requiring high enough ,, in particular (a little less than 45 cm). Provide space on the worktop. Knowing that you will have room to move above the pusher (20 cm, must under pain of your mousing pulp cooking, I tested ^^) In use comfortably so you need 75 cm space height.

The plastic seems very good.
The aluminum hull and closing hoop is very thick, very rigid.
This is apparently at least we will see over time, a robust device.

It has suckers for a good seat. Useful only on a smooth, recess.
My work plan is not regular, cupping serve only feet but the device does not move.
The cord to a very correct length, 1.50m. He has the good idea to wrap in half around the machine to avoid having a thread lying around if you like me catch nearby.
Unfortunately the thread is blocked in part by the pulp, and of course when it is removed for cleaning the wire tends to move. It must be viewed with the tank. It's a shame. While I think that once the thread has acquired the habit it will not be a concern.

In terms of start-up is extremely simple. You just read the short notice to avoid injury while cleaning the cutting part ceramic (very efficient, it is shown to last five years before replacement in daily use).
There is a button that rotates three positions, there is no risk that unnecessary electronics fail and that is what I personally like about this brand.

I was very pleasantly surprised at the low relative noise of the machine.
I had read reviews talking about the deafening noise centrifuges, it really is not. This is equivalent to the noise of a coffee machine.

Fruit disappear in a few seconds, it's very fast.
I have not done the calculation for the amount extracted for now but I extracted ginger which seemed to give a lot of juice in the light of the setting amount. (although very strong energizing juice ^^) . Two apples are a glass, it works very well with carrots too. As against the softer fruits like orange or kiwi seem to go faster in the pulp tray and lower returns.
There is a stop for drop distracted (it lets the juice but if you forget the drops stop in normal use)

Disassembly and reassembly is childish, and there is a security that the machine can only work perfectly fitted. This is significant since I curious toddlers.

There are 5 items to clean: Push the transparent cover, the basket of pulp, the drip tray and finally the entire blade of the grid that are integral.
The plastic parts can be rinsed with water without worry, there are no inaccessible space, it takes a few seconds.

For the grid there should be a brush (tooth for me) to facilitate cleaning and avoid touching the cutting part of the ceramic.
Similarly it is done in a minute (at least if you time it right away, it's like everything related to fresh fruit and vegetables, if allowed to dry it will certainly be more difficult to clean.)

Everything goes to the machine. But everything is quite bulky though, it seems easier to rinse by hand.

There is an effective anti-foam system on the pitcher graduated up to a liter and a half. (Centrifugation produced a fairly thick foam so not always very comely). As against the lid of the jug is not blocked, we must take it when one looks (for example to finish the background) otherwise it ends up in your glass, it is not catastrophic but perfectible.

Finally, subject to the test over time, I am very happy with this gift that made me (the price does not seem very competitive at nearly 170 euros anyway, we should find the least expensive.)