Drilling with the / the / the IXO

I bought this for my chuck Bosch IXO, but because it occasionally happens that sometimes you have to drill a small hole.
It is clear that the Borhfutter + IXO by no means a substitute for a proper drill, but to drill here and there a small hole it just fine.
In the food fit a maximum 6,5 drills, so I drilled to test a couple of times holes in a wooden board, which worked without problems (see picture).

Now for the details:

The chuck is super of the processing, in my view. When I look at the packaging the chuck is well designed for IXO and similar machines, which is why I wonder why the 6 then Kant is unnecessarily long.
This brings us already to the problem, the whole construction is very long, looks accordingly from adventurous and is therefore not as easy to handle and stable (see picture).
In addition, the lining wobbles somewhat in the machine, but what is simply because it just plugged 6 is just on edge. In my case, the drill is moving at the end of the Pointed approximately + - 3.5 mm, but it did not bother me during drilling.
The problem that the feed during the pull out after drilling out of the machine falls, I could not comprehend directly, but is logical because it is only held by a magnet.

Conclusion:

For emergencies or for a few small holes, the product is great and I would recommend it, but who wants boring really should resort to a proper drill.