Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm

Categories


  • Bought for the Bosch IXO, cheaper and at least as good or better than the original accessories  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    I bought the Schnellbohrfutter for Bosch IXO, it's cheaper and at least as good or better than the original accessories that are not black matt finish and almost twice as expensive. Again, it is recommended that the moving parts to miss a load of sil
  • For IXO too long  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    The hexagon for receiving the device is too long for the small IXO from Bosch. I have resorted in order to sever the shaft with a blade before the groove and grind the edges slightly. Now it fits very well with the IXO and small holes in wood can be
  • Nice idea, restricted in practice useful  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    Nice idea, but in practice limited use. The chuck is solid and makes a high minimum adequate impression. It works even less as one imagines that. But ... more than a very thin, small, short drills should not clamped there. Then the whole structure is
  • Quick chuck, top thing !!!  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    I've been using it for many minor tinkering, where you do not want to always take the big electric screwdriver at hand, it fits perfectly in the small mini screwdriver, so you can sometimes drill a small hole in light metals or plastics, having to op
  • Drilling with the / the / the IXO  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    I bought this for my chuck Bosch IXO, but because it occasionally happens that sometimes you have to drill a small hole. It is clear that the Borhfutter + IXO by no means a substitute for a proper drill, but to drill here and there a small hole it ju
  • For Bosch Ixo not really suitable  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    I bought this for a drill chuck Bosch Ixo IV cordless screwdriver to pre-drill at least small holes before screwing. The Ixo has not chuck, but only a holder for bits. The version of Woltcraft chuck for Ixo IV but much too long. So only the photo on
  • Chuck for small cordless screwdriver  

    Wolfcraft 2625000 1 Quick-chuck 6 kant 6.5 mm (tools)
    For cordless screwdrivers have not chuck this is a good solution for small drill for chucking. Thus, from the small screwdrivers usable drills, for drilling of smaller works.