I have a home bought the slide scanner for me because I have a lot of old slides that should be digitized once. So I created the slide scanner on Friday evenings packed up and connected to my Windows 7 computer. That went off without problems. First step is to install a lot of software. As I could see in any instructions which software do I need for scanning color slides, I just had to install all the software. Then I therefore used in a small slide carrier four slides. The carrier is not pleasant to use because it has a lot of sharp edges. That's not a problem when one-time insertion. But if you have to use long and remove slides for an entire evening. In the end you have to make do with tools then. Now comes the biggest flaw: The slide scanner must then always individually be supplied manually with a slide. Then the slide is scanned briefly for a quick view (you can also turn off but then he cuts away any dark / black edges And if that is to is now time to image the picture only half as large -.> So I got it manually done ). Following are selected manually on the PC scan area. In the final step it scans now. The scan itself takes so about 1 minute. That's actually quite fast. Not even with all working-, Prescan, selecting and scanning steps 40 slides per hour - but as one creates. Should not sit next to me if it were not matter. But since you constantly have to press what you're so busy with 100 slides over two hours. And: The color reproduction is miserabelst. I got it may not be set properly (there is no manual) - have also been working with a calibration slide - but provide ultimately abfotographierte Projected slides better digital quality - at a speed so that I get at least 400 images per hour by.
+ Resolution of Dias
- Insufficient description - Slide carrier with only 4 slides - Miserable speed - No Automation - Poor color resolution
Now if you do not because of a few slides, you need extremely high quality, is ready I can pay that much too high a price here only advise.