And now I have my ego ONE gained in size and a new life begins.
The steam development: Phenomenal. Despite the rapid development of steam has an excellent taste. In one second I have as much steam as the old ego CC after 5+ seconds suck. It flashes so good that I went from 18mg nicotine content down to 12mg. The evaporator has made not even singed in the first few days a consistent good quality, one can also visit us recently in and it looks even remotely. The tank is sufficient despite fast vapor in the evaporator 1 Ohm to the evening to keep me from morning to happy. It then draws up shorter. Even fast Paffen hintereinanderweg seems to the evaporator harm. With so much fun I do not need less than 1 ohm. It is amazing that in spite of the heat that is generated in the evaporator, the steam itself is pleasantly cool.
The battery: 2200mAh The package I release in the morning from the USB cable and can evaporate so go to sleep. So the day may be a bit longer also like. An amazing piece of engineering, considering how much electricity in a short time by the 1 ohm will flow head.
Accessories: There are two Driptips, one from the same stainless steel and a Plexiglas. Both are quite short and fit visually to the tube. However, the Metalldriptip heats up with the device, unfortunately, very strong, so I now use only the model made of Plexiglas. But one could certainly pull off half a star. I can also imagine that I would like a longer Driptip me. In plexiglass Driptip seen quite quickly clear condensate / water. A USB cable for charging is; well here is 1 evaporator with 1 Ohm and an evaporator with 0.5 Ohm, the latter but I have not yet tested, I am fully satisfied with the 1 ohm.
What else to hear this: It has been reported that the ego ONE with the 0.5 Ohm evaporator then tends to families when one evaporates the tank almost empty. So far I have not yet managed.
I do not know if you should really go as beginners alike in the Subohm area; the ego One is now being expected not cheap; if one bears in mind that the battery needs to be able to cope with a 0.5 Ohm evaporator (which is already quite close to a short circuit) and when you see the evaporator system is very robust and nevertheless as consumables is not much more expensive than other evaporators Joyetech series, and again envisions that 10 Bigpacks Pyros cost the same, is it really worth the money for me.
Conclusion: At last I have a mobile steam unit that is robust, that I do not have to constantly provided with a new battery and wherein the tank sometimes offers stock a day or an evening. Alone for this ease, I give you back an extra half a star. I can get in my brief steam breaks the day with short trains the little flash and no longer must seconds suck on the device. And I went in a liquid nicotine strength down, because this is absolutely sufficient.
Buy? Yes! Probably the best in January 2015 Subohm-To-Go system on the market.
* UPDATE - 0.5 Ohm evaporator *
Now I've done it for a week, my 1-ohm evaporator to bring to bubble, which has led to the fact that this was no longer useful to use. But I must also write that I and often short evaporate MUCH succession! Overall, I set a day by more than 5ml Liquid. Personally, I find it ok if I use a fresh evaporator head for a good week and then can continue rumdampfen wild.
So I created the accompanying 0.5-ohm evaporator angetestet times; he is even faster with the development of steam when the air flow control completely unscrewing and the drip-tip touch it with your lips and you can steam wonderful Open Draw breathes with her mouth slightly open. However, one must say that I am not a fan Open Draw. For the normal steaming I find the 0.5-ohm to evil, so that I am after half a day back to the 1-ohm head back. In my "steam technology", the device is also fast becoming hot to me. I also find that even the 1-ohm head for Open Draw sufficient.
I had mentioned the rumor that the 0.5-ohm head could tend to clans. That's true, unfortunately. But it is perhaps also because I simply evaporate too wild and can start anything with Open Draw. Those who place value on it to use the 0.5 Ohm evaporator is the device safely plan to withdraw a star. But who likes evaporated with 20-30 watts, certainly has a lot of other demands on a steamer. All others have to the 1 ohm head certainly a lot of fun!
* UPDATE - bubbling *
Slowly you get to know his new evaporator. The bubbling is not necessarily a sign that the evaporator is carried; what has helped me is to unscrew the evaporator head, short clean the base with a tissue, then tighten again - done. Let's see how long you can keep as an evaporator head alive :-) I check again whether it might not be the cause because of the fact that you too hard / too loosely furled the evaporator head.
* UPDATE - Socket *
So, one should the evaporator already really good tighten ... or he might end up when unscrewing the tanks on the wrong side. What does help, in any case, is regularly unscrew the evaporator head to clean the base a little and head back on it. This goes quite fast and prevents bubbling and clans. 1x a week I clean then additionally with alcohol (water one should not take power to instructions not make much sense - risk of short circuit)
