+ Very chic (especially in contrast to most other wall brackets)
+ Very stable (holds my 50 "Plasma without problems and without wobbling)
+ Very reasonable price (comparable cost mounts otherwise well over 100)
Now why the negative review?
The way there was very rocky and difficult!
I could easily write several pages here I try to summarize points times:
- Construction at a slight angle (not impaired function and luckily no longer falls behind the TV on) welded together
- Missing thread in the parts which need to be assembled (M8 tappers brought Remedy)
- Missing thread in the detents for the TV-holding rails (M6 tappers brought Remedy)
- TV-holding rails badly bent (bend the pliers and fabric upholstery as was necessary)
- All the parts very stiff (ie disassemble, lubricate and reassemble (all pull not firmly)!)
- China scrap for wall mounting (necessarily dispose and some quality / suitable for the corresponding wall of the Specialists get his confidence (can be seen as negligence which is such a thing settled))
- No matching screws and spacers for my TV (appropriate screws and washers from the hardware store concerned)
- Caps on the tube ends Fehlkonstruktion (these are only decorative screens in VESA 400 on the television slips easily from the tubes -> Remedy managed here 4 clamps (hose clamps) from the hardware store for locking)
Ultimately, I suppose I should cause a replacement but first would have been so remedied, not all problems (if any) and when (s) seated then first weekend with the whole mess as the construction market is not far and tools available captures Man (n ) but then to tinker with.
:-)
