This adhesive has pleasantly surprised me. He sticks a broken glass plate out of the refrigerator. This holds now for six weeks of daily exposure of a three person household stood. I can load the glass plate after bonding and curing as usual. The formerly broken body can be seen, of course, the adhesive itself is but in the truest sense of the word crystal clear. The adhesive connection must be so strong that it does not sound stuck when you knock it (usually it sounds then dull, but here it sounds bright). I have the adhesive applied on a sunny morning and during the day out in the sun to cure. After about an hour the connection seemed stable, but I have stuck to the instructions and allow it to harden for many hours. However, it is not a typical UV adhesive which is fixed by UV irradiation after only 30 seconds. I initially testweise irradiated for a few minutes with a strong UV lamp, after which he was still quite fluid. One should therefore really follow the instructions and a full day in the sun to cure berücksichtigen-
The glue is very fluid, making it good flows in small cracks and crevices. Therefore you should apply quite economical him, Thus it is also suitable mainly for repair of broken glass. If the adhesive surfaces do not fit, it is less suitable, since it can hardly be bridged gaps.
Conclusion: Great adhesive, enormous adhesive force, little complicated to use because it has a long curing in daylight. But if some time (and Sun) brings, receives excellent, barely visible, durable bonds. Recommended!
