Good - especially suitable for SP's Holder Kit; Attaching very difficult

I'm not exactly a novice in applying screen protectors, but this has brought me almost to despair. The film is designed in size so millimeter precision for the display that already causes a minimal deviation from Parellelität film to screen edge that the metal edges of the display making a bubble-free resting naught. The mumbi films for my S3 specially the label is attached to the film due to such problem "extra is too small". I do not know why you have not used this experience here. I have three films burned until the fourth finally sat correctly. The readjustment is not quite as simple as easily form by the size of the film "creases", which are then no longer get rid.

Tips for mounting: Before the display meticulously säuber (Screen Cleaner and fusselfreis cloth). The size of the display, it is impossible nahezug that no dust under the film creeping during application again (solely from the air). Stopping air would actually announced, but has not geklaüüt with me because of the duration of applying ;-) Therefore here often called tip with the scotch tape is worth gold: A strip of adhesive tape on the lifted edge of the film glue (never under the film hold, otherwise this equal in the trash) and with the sticking side facing outwards (so that lint is collected) wrap around a finger.

Why did I still again decided after three unsuccessful attempts for the film was the SP's Holder. This has taken the rubber top of the standard Spens a non-replaceable tip made of hard plastic. This can be convenient but write clearly a long time. Out of concern for my screen so had to go back a film on it and lo and behold: Now may be the Holder write much better (also and especially because of the hard plastic tip) than the normal SPpen.

Conclusion: Good protector in proven quality. Attachment requires time, patience and possibly Fehlversuce. When used with SP's Holder Kit highly recommended. Otherwise, perhaps enough also a case with lid.