The lamp is supplied in a sturdy box. There it is packed in individual parts that have to be assembled first. This goes Ruck Zuck. Lamp arm rotate in the foot, put light panel on the lamp arm, power cord plug in - finished. Supplied also are still a carabiner and a guide available.
My test model is matte black. You can arm the lamp in all directions biegen- depending on where they should light. The lamp is well made, has no interfering edges or corners.
You can use the lamp as a normal desk lamp. The PowerTouch switch on top of the lamp head. Press once more goes to the lamp (and from), then press and release the touch yet each switch and they will more or less dimmed. There are three dimming levels available.
The lamp has two additional functions. At the lamp base is a USB port. Here you can recharge by means of a (not supplied) USB cable be smartphone, tablet or other device. This is only possible if the lamp itself is connected to the electricity network. It is also possible to decrease the LED lamp head. After a charging time of about 5 hours this lamp head is charged and can be carried around as a mobile lamp as a flashlight. Via the supplied carabiner can the LED lamp head somewhere attach eg to a pocket or on a hook.
One complaint I still have and although the lamp base is very light. Bends to the neck a little more, so the lamp falls therefore to fast. I also have the ToaTronics TT-DL05, a similar LED desk lamp here is the stand better because it is more difficult to some, and the lamp does not tilt so quickly.
I think the light from the lamp very pleasant and the 3 dimming levels are adequate for different occasions. I can recommend the lamp when you want to use one of the additional functions (USB charger or removable lamp head). Do I need this not I recommend the TT-DL05 to the stable state.