Good product - Processing instructions

The product gives the wood a natural "waxy" look and is relatively easy to work with. How to applying the wax oil remains an ultimately left to itself (eg, role, ...). I have the wax oil applied thinly using a commercially available microfiber floor mop (either one drops something on the floor and everything blurred or one pours the material directly onto the microfiber). The blur was admittedly a bit tiring, but the result was very uniform. IMPORTANT (I myself initially done wrong): After applying the supernatant must necessarily (Standard Bodenabzieher ausm hardware store, squeegees for example) are removed using a puller, otherwise the layer is too thick and uneven. I then after 30 min everything with beige and white finally polishing disc by means of a (at the hardware store loaned) floor polisher "finishing takes". Definitive drying lasted more 36-48h (instead of the specified 24). The odor is very limited (yes, no solvent is added).
Respect. the specified fire hazard I have contacted support: It is obvious all wax oils immanent that these generate heat during curing. Cloth, paper towels, etc. Thus, not all cram into a garbage bag, because then the heat can not be derived adequately and spontaneous combustion is not excluded. Therefore let etc. interpret and dry the cloth individually (then the heat can not accumulate). When everything is dry, can be disposed of safely.