Einhell TH-MS 2112 crosscut and miter saw, 1400 W, blade Ø 210 x Ø 30 mm, cutting width 120 mm, professional blade, continuously tiltable saw head (tool) 5
Einhell TH-MS 2112 crosscut and miter saw, 1400 W, blade Ø 210 x Ø 30 mm, cutting width 120 mm, professional blade, continuously tiltable saw head (tool)
I had to cut skirting boards without spacers and fit and was with two hand-saws to despair (too much play and thus large gaps between the skirting). At the hardware store, I then a professional hand miter saw (70) and the electric saw Einhell taken (59), because I was afraid that the Elekrosäge would make unclean cut, as the borrowed larger electric miter saw from the neighbor. I loved the expensive hand miter saw ... so suddenly gelingten very clean cuts, because the blade was out very genu. After I then tried the Einhell Electric Saw, I was certainly impressed. After slight adjust the right angle, the Einhell Saw made very fast and very, very clean cuts. I opted for the electric saw because you much faster the strips could thus by sawing. As for dirt, is the hand saw clearly! advantage. When I cut for two rooms baseboards, would the bathroom, where I sawed the bars, be thoroughly cleaned. Everywhere fine dust was to be found, even though I used the dust bag. Because, unfortunately, is not even one-third of the dust hinein.Vielleicht would a vacuum cleaner connection have been better. What I like about the saw: for the price and performance really good and efficient as good Handgehrungssägen. There are also re-cuts of possible under a millimeter, if you can still keep the good bars. Mir handsaws slid the blade in such sections mostly herraus from the cut. Who needs a simple, small and lightweight Elektrogehrungssäge and without laser manages that we be satisfied with the Einhell. What I would like to see: Holding the object (smaller pieces) is not easy, since the vertical guide wall on the saw blade is relatively flat. Better holding device for the Sägeobjekt would be nice. Since the blade must come down very far to saw through the Sücke, you have very little space to wirklch holding the workpiece, because the engine nice more often on the hands is (depending on the cutting angle). A small cutting rail would not have been bad, so that one could saw through even wider Brätter.
I would of Einhell Mitre awarded 4.5 stars. Since there is no such, it is of me for good price / performance Verhältnises five stars.