Good thing, but be careful when processing !!

Step 2: polish
Often one encounters the opinion that the gloss is created with the wax. False. The shine comes through the polish. The wax is only a 'seal on time', the light reflects light and is only the supposed splendor makers.
Anyone who wants to achieve a long-lasting Teifenglanz, must now let it fly polishing. Along with modern synthetic polymer waxes (eg G18211) can then be almost achieve a 'wet look'.
So the second step comes to the central importance (after Lackreinigung). The agent is mixed with alumina as a polishing agent, a good choice, because that no sanding marks can also contribute to pressed hard arise.

ATTENTION: Always use polishing small areas and not allow to dry!
If the polish has dried, it can be removed with the microfibre cloth only extremely troublesome again, if at all !!
Anyone faced this problem last end have no choice but again to remove the crack permanently dried polish with the same polish, but what then goes surprisingly well.
Definitely not by polishing the whole car and then try the supernatant of polishing decreases again. With the Step 1 (paint cleaner) and Step 3 (carnauba wax) this is no problem, but the polish is as 'vindictive'.

Certainly applies to the application with a polishing grinder and thus additionally occurring thermal component: Small surface polishing (max 1/4 m2.) And then pay off immediately with the microfiber cloth. This passage can do just fine for two, then goes Ruck Zuck.

Prima polish!
No purpose Because all sooo economical.