Background: Have this adapter appointed for a second purchase of a Twinny Load Light from the 1990s. Unfortunately there was this part of the previous owner. Pro: - The height adjustment reflects a wide adjustment range and thus apparently extremely many clutch systems. My clutch is perpendicular and is zielmlich high (see my photos), so I was not sure what level or what adapter I needed. - Thanks to this product, it is not just for my car special for my future couplings also. - The material is thick and seems stable. (The practical test on the coming holiday will prove it.) Contraindications: - Through my Falschverbau (not aligned with the stability of the coupling tubes) I braced the system upon insertion of the carrier. My gruff dismantling has unfortunately broken one of the two threaded bushings. Here it seems to me the deep-drawn nut as quite "fimschig".
I'll try to get a new one as a spare part from the manufacturer. In the meantime, I've resorted to an M6 bodywork mother that I have short-cut. The coupling clamp I at the 2nd mounting attempt rotated and also the bike rack with the stabilizer jack could be mounted without tension (alignment of the center lines of the Stabi-pipes with the Kuppungsstange accordance with assembly instructions) and disassemble.
So in summary: Top product with less weakness, for which I would like to pull off half a point. Should I get a spare connector which keeps longer, I will raise the rating.