In the Focus mixer with the much higher spout and shower without the water now, which is located after turning even in the outlet pipe runs after. During heating of the undercounter unit it drips course easily.
I have the outlet pipe removed from the mixer to see why the water running after. In addition I have opened the mixing lever gently and closed (please do not try this, it could inject ...). The valve closes immediately to 100%. So it may be the hunting of water only the final balance of the high spout.
I would compare this situation with the aspiration of fluids by tube from a container. As the liquid passes, too long out of the tube until the tank is empty, or is withdrawn from the liquid ...
To mount another note, the flexible connection hoses are each about 75 cm long (roughly measured it). It is provided for the water connection, a flow limiter (no primitive plastic tubes!). For the ports on the storage two compression connections for the 8 mm tubes of the two connecting hoses from the mixer are required. These are not included because they would otherwise belong to storage?!?
I'd focus sink mixer, even if he runs after something definitely buy again and give here my purely personal experience / opinion again!